HSB home  
RoentDek Handels GmbH
Im Vogelshaag 8

D-65779 Kelkheim, Germany

page printed: http://www.roentdek.com//products/supplement

 

RoentDek PRODUCT LIST 

STANDARD REPLACEMENTS AND SUPPLEMENT ITEMS

       
 

Product
number
 

Product
Description
 
  093/094 Potential Mesh: (with 1 mm hexagons)
DESCRIPTION SHEET

for DET40/75 (transmission >80%)  
         
091/092 ...or with 4 mm squares
DESCRIPTION SHEET
(transmission >94%)
     
095/096 Wowen potential Mesh: (with 140 micron open cell)
DESCRIPTION SHEET
for DLD40 (transmission >75%)
for DLD80/HEX75 (transmission >75%)
099

for DLD120/HEX100/120 (transmission >75%)
   
097 Calibration masks
DESCRIPTION SHEET
for DLD40/DLD80 or HEX75
   
098 Shim 40 / 80 / 120: Intermediate contact spacer for MCP stacks
   
  323 BA3:battery box for delay line detectors. Provides floating 36V potential difference (saves one power supply channel).
     
     
     
  325 HVZ: passive DC adjustment box, for delay-line anode and MCP rear bias settings, up to 4kV.
HVZ-T:passive DC adjustment box, for TOF anode and both MCP bias settings (DET only).
     
  259 PCI2PCIe: adapter crate for TDC8HP to PCIe bus or laptop card for up to 3 TDC8HP units.
     
 

361

HFSD / HFST: HF-signal decoupler/terminator. Detector side MHV (optional SHV), rated to 4 kV, high voltage input SHV, HF-signal output to lemo00 socket / terminated by 0-200 Ω.
DESCRIPTION SHEET
     
 

362

ST50: 50 Ohm signal terminator
       
  363 pInv&Att: Signal inverter and/or attenuator for fast and short signals, bandwidth 1-300 MHz, 50 Ohm coax lemo00 in- and output.
DESCRIPTION SHEET
     
  364 SP1: in-line spark protector, lemo00 in-/output.  
  148 VL1: active protection amplifier to delimit excessive signal height for subsequent circuits.
DESCRIPTION SHEET
 
       
  365 SHV-T: SHV-T-connector for supplying two SHV-inputs from one bias output / MHV-T  
       
  366 SHV-G: SHV ground plug for setting detector potential to 0V bias ("ground") / MHV-G  
       
  190 SHV-SHV cable: for detector bias, 1 or 4 m, length (to be defined, default: 4 m)  
       
 



Cable sets ("lemo") for connections FT12(16)TP - ATR19 and ATR19 - TDC8HP/TDC8HQ
  191 Single lemo cable (4m, 2m=10ns, 1m=5ns, 4ns, 3ns, 2ns, 1ns)  
194 Set of 5 cables (4 m, different colors)
195 Set of 8 cables (2 m or 4 m, different colors)
196 Set of 4 x 1 m, 4 x 2 m and 2 x 4 m
197 Lemo Set for CFD1c(x)/4c/8c/7x: 1 ns, 2 ns, I-connector (2x), 4(6)x4 ns, 4(6) x 5 (or 10) ns

 

 
198 Lemo starker kit: misc. connectors/adapters/cables (12 pieces total)
 

 

   
199 Lemo starker kit plus: Lemo starter kit with additional misc. BNC connectors (20 pieces total)
       
    Please contact us for any requests at: sales