The following is a list of typical product combinations:

 Standard Delay-Line Detector System

For single particle detection, VMI or beam monitoring

  • Detector with MCPs:
    • DLD40
    • DLD75
    • DLD105
  • Mounting flanges CF100 up to CF300 (optional)
  • DN40CF Feedthrough and signal decoupler box:
    • FT12TP (needs one DN40CF-port)
  • High voltage module (HV3)
  • Amplifiers and CFDs:
    • FEE2: 2 ATR19b modules for the anode signals and FAMP1+/CFD1c for the MCP signal
    • or FEE5: FAMP6L 6-channel amplifier with CFD4L for the anode signals and CFD1c for the MCP signal
  • 8-channel TDC (TDC8HQ with CoboldPC software)

 Advanced Delay-Line Detector System

For pairs/groups of particles. Zero dead time.

  • Detector with MCPs:
    • HEX40
    • HEX75
    • HEX100
  • Mounting flanges CF150 up to CF300 (optional)
  • DN40CF Feedthroughs and signal decoupler box:
    • FT16TP (needs two DN40CF-ports)
  • High voltage module (HV3)
  • Signal processing type CFD/TDC:
    • FEE8: FAMP8c and CFD8c
    • TDC8HQ (8-channel TDC)
    • Software CoboldPC
  • Alternative: Signal processing type ADC (digitizer):
    • 8-channel amplifier (FAMP8)
    • 2×4 ADC-channels (2x fADC4)

MCP Detectors with Phosphor Screens

For imaging via CMPS/CCD cameras.

  • Detector with MCPs:
    • DET25P
    • DET40P
    • DET75P
    • DET105P
  • Mounting flanges with view ports CF100 to CF150.
  • Optional: Signal decouplers for timing pickup:
    • HFSD/HFST
  • High voltage module (HV3)
  • Optional: Amplifiers and CFDs (e.g. FAMP1c, CFD1c)

MCP Detector with timing anode

For pairs/groups of particles. Zero dead time.

  • Detector with MCPs:
    • DET25
    • DET40
    • DET75 or Channeltrons
  • Mounting flanges CF100 up to CF300 (optional)
  • Signal decouplers for timing pickup:
    • HFSD/HFST
  • High voltage module (HV3)
  • Amplifiers and CFDs (e.g. FAMP1c, CFD1c)
  • or simple discriminator of type LET1+